MODEL：MCV-1050
TABLE | |
|---|---|
| Table surface area | 1,120 x 560 mm |
| Max. table load | 1,000 kg |
| T-Slots ( W x No. ) | 18 x 5 |
| Distance from table to floor | 900 mm |
| TRAVEL | |
| X-axis travel | 1,050 mm |
| Y-axis travel | 560 mm |
| Z-axis travel | 560 mm |
Distance from spindle center to column surface | 600 mm |
| Distance from spindle nose to table surface | 150 ~ 710 mm |
| FEED | |
| Cutting feed rates(X, Y, Z-axis) | 1~10,000 mm/min |
| Rapid traverse rates (X, Y, Z-axis) | 30／30／18 m/min |
| Minimum input increment | 0.001 mm |
| SPINDLE | |
| Spindle nose taper | NT.40／N.T.50 |
| Spindle speed | 80 ~ 8,000 rpm |
| Spindle motor | α8／8,000i |
| Spindle speed steps | Two-step gear drive |
| AUTOMATIC TOOL CHANGER | |
| Tool magazine capacity | 24 T |
| Tool shank type | BT40／BT50 |
| Max. tool dia. x length | Ø76 x 300／Ø105 x 300 mm |
| Max. tool weight | 7／15 kgw |
| Max. tool dia (without adjacent tool) | Ø150／200 |
| Tool selection | Random |
| MOTORS | |
| Spindle motor (30 min./cont.) | 7.5kw (10hp)／11kw (14.7hp) |
| X-axis servo motors | 2.5 Kw |
| Y-axis servo motors | 2.5 Kw |
| Z-axis servo motors | 3.0 Kw |
| INSTALLATION REQUIREMENT | |
| Space occupied(X／Y axis) | 3,730 x 3,105 mm |
| Machine weight | 8,000 kg |
Specifications are subject to change without prior notice.
STANDARD ACCESSORIES
- Heat exchanger for electrical cabinet
- Fully enclosed splash guard
- Autonatic lubrication equipment
- Automatic power off
- Tool box and tool kits
- RS-232 interface
- Spindle cooler
- Coolant jets around spindle
- Rigid tapping
- Call light
- Work light
- USB port and embedded ethernet
SPECIAL ACCESSORIES
- Air conditioner for electrical cabinet
- Coolant and air gun
- Coolant through spindle device
- Automatic tool length measuring device
- Automatic workpiece measuring device
- Flat type chip conveyor
- Lift up type chip conveyor
- Oil fluid separator
- Coolant wash device
- Linear scale
- 4th axis
