MODEL：MCV-1060
TABLE | |
|---|---|
| Table surface | 1,200 x 580 mm |
| T-Slots ( w x no. x pitch ) | 18 x 3 x 150 mm |
| Max. table load | 1,000 kg |
| TRAVEL | |
| Longitudinal travel ( X ) | 1,060 mm |
| Cross travel ( Y ) | 560 mm |
| Headstock travel ( Z ) | 550 mm |
| Distance from spindle nose to table surface | 150 ~ 700 mm |
Distance from spindle center and column surface | 600 mm |
| Ball screw cooling | Without |
| Slideway type ( X, Y, Z-axis ) | Linear Guideway |
| FEED | |
| Cutting feed | 10,000 mm/min |
| X-axis rapid traverse | 40 m/min |
| Y-axis rapid traverse | 40 m/min |
| Z-axis rapid traverse | 30 m/min |
| Minimum input increment | 0.001 mm |
| SPINDLE | |
| Spindle type | Belt - Type |
| Spindle motor 30 min. rating | 11 Kw |
| Spindle motor continuous rating | 7.5 Kw |
| Spindle nose taper | NT.40 |
| Spindle speed | 8,000 rpm |
| Spindle bearing size | Ø70 |
| Max. spindle torque | 47.7 N-m |
| Cooling / Lubrication method | Oil cooling / Grease |
| AUTOMATIC TOOL CHANGER | |
| Tool magazine capacity | 24 T |
| Tool shank | BBT40 |
| Pull stud | Jaw type 45° pull head |
| Max. tool weight | 7 kg |
| Max. tool length | 300 mm |
| Max. tool dia. | Ø90 ( 150 ) mm |
| Tool selection | Random |
| MOTORS | |
| X-axis drive motors | 3 Kw |
| Y-axis drive motors | 3 Kw |
| Z-axis drive motors | 4 Kw |
| OTHER | |
| Power required | 36 KVA |
| Air pressure required | 6 Kg/cm² |
| Coolant pump | 3/4 HP |
| Coolant tank capacity | 300L |
| Floor space | 2,900 x 3,895 mm |
| Net weight | 6,000 kg |
Specifications are subject to change without prior notice.
STANDARD ACCESSORIES
- Heat exchanger
- Removable manual pulse generator
- Fully enclosed splash guard
- RS-232 interface
- Automatic power off
- Call light
- Autonatic lubrication equipment
- Work light
- Tool box and tool kits
- Spare fuses
- Swing type operator panel
- Spindle oil cooler
- 24 tools cam type ATC
- Rigid tapping
- Chip augers on base
SPECIAL ACCESSORIES
- Screw type chip conveyor with chip bins
- Flat type chip conveyor and chip bins
- 4th axis connectol
- Coolant through spindle device with filter
- Bed coolanr wash
- Automatic tool length measuring device
- Automatic workpiece measuring device
- Linear scale
- 30, 32, 40 tools cam type ATC
- 12,000 / 15,000 rpm direct drive spindle
- 15,000 rpm built-in type spindle
